Steel Steel 1.2379 / X155CrVMo12-1
1.2379 steel is a high carbon – high chromium air hardening cold work tool steel, heat treatable to 60-62 HRC. 1.2379 offers excellent wear and abrasion resistance, due to large volumes of carbides in the micro-structure. Applications X155CRVMO12 Tool Steel is used in the making of knife-edge mold, scissors, circular saw blades, metal stamping mold. […]
PTFE / Teflon
Polytetrafluoroethylene (PTFE) is a synthetic fluoropolymer of tetrafluoroethylene, and has numerous applications because it is chemically inert.In 1938, a DuPont chemist named Roy J. Plunkett accidentally discovered Teflon while attempting to make a new chlorofluorocarbon refrigerant. DuPont patented the new fluorinated plastic and registered the Teflon trademark in 1945. Applications and uses Wire insulation, electronics： […]
Steel 1.2842 / 90MnCrV8
1.2842 steel is a medium alloy cold work steel containing approximately 1% carbon. It has a high hardening ability towards the core. It is dimensionally stable and offers good compression strength. It has a similarity to 1.2510 steel. 1.2842 quality steel is also called oil steel because it can be hardened in oil. DIN 1.2842 […]
Steel St52 / S355J2G3 / 1.0570
S355J2G3 steel is widely used in welded structures subjected to dynamic loads, such as bridges, vehicles, ships, pipelines, boilers, large vessels, oil tanks, heavy machinery, mining machinery and cryogenic pressure vessels. S355J2G3 steel is widely used in welded structures subjected to dynamic loads, such as bridges, vehicles, ships, pipelines, boilers, large vessels, oil tanks, heavy […]
Aluminium EN AW-5083 / 3.3547 / Al-Mg4.5Mn
EN AW-5083 – CORROSION RESISTANT. EN AW-5083 belongs to the group of non-curable (naturally hard) alloys. Therefore, after homogenization, it can either be used directly or reshaped immediately. Carrying out a heat treatment to increase strength is not possible. Der Werkstoff 3.3547 wird aufgrund seiner vielen positiven Merkmale in diversen Bereichen genutzt: Apparaturen und Tanks […]
POM / Acetal
POM material, also called acetal plastic, is a semi crystalline thermoplastic with high mechanical strength and rigidity. POM material has very good sliding properties, excellent wear resistance and low moisture absorption. The material’s dimensional stability, particularly good fatigue strength and excellent machinability make plastic POM a very versatile engineering material, especially for complex components. POM […]
Stainless Steel 303 / 1.4305 / X10CrNiS18-9
The steel grade 1.4305 (also called AISI 303 and SS2346) is a free-machining austenitic stainless steel with excellent machinability. It is suitable for massproduction of details requireing good resistance to atmospheric corrosion and good resistance to many organic and inorganic chemicals. It shall not be used in marine environment or coastal environments. It is non-magnetic […]
Aluminium EN AW-7075 / 3.4365 / Al-Zn6MgCu
7075 aluminium alloy (AA7075) is an aluminium alloy with zinc as the primary alloying element. It has excellent mechanical properties and exhibits good ductility, high strength, toughness, and good resistance to fatigue. It is more susceptible to embrittlement than many other aluminium alloys because of microsegregation, but has significantly better corrosion resistance than the alloys […]
Stainless Steel 316L / 1.4404 / X2CrNiMo17-12-2 / V4A
It is an austenitic chromium-nickel alloy that contains molybdenum and nitrogen. This combination of elements makes it durable and provides it with a number of other desirable properties. The addition of molybdenum results in improved corrosion resistance with good stability against chloric and non-oxidizing acid. It has good heat resistance which reduces in continuous use […]
Steel S235JR / 1.0038 / St37-K
This is a hot-rolled pure structural steel. With good plasticity, toughness, and weldability, it has a lower yield strength of 185 – 235MPa. It is equivalent to Fe360B. Any steel with similar chemical and mechanical properties can be designated as S235JR material. EN 1.0038 material can be made into many steel products, such as H […]
