1.0501 / C35 / AISI 1035
C35 steel is a medium carbon, medium tensile steel supplied as-forged or normalized condition.This steel shows excellent forgeability, reasonable strength, toughness and wear resistance. C35 is easily welded with the correct procedure.Due to the carbon content preheating and postheating are required.It has good Machinability after full annealing.Wide range of mechanical properties can be attained by quenching […]
1.0401 / C15 / AISI 1018
C15 has a good balance between toughness, strength and ductility and is the most commonly used steel in the world. Although its mechanical properties are not very unique, it can still be easily formed, machined, welded and manufactured. C15 has excellent weldability and uniform hard surface layer, which is considered as the best steel for […]
Titanium Grade 5 / Ti-6Al-4V / Ti 6-4
This alpha-beta alloy is the workhorse alloy of the titanium industry. Titanium grade 5 has good tensile properties at ambient temperature and a useful creep resistance up to 300°C. Resistance to fatigue and crack propagation is excellent. Like most titanium alloys, Grade 5 has outstanding resistance to corrosion in most natural and many industrial process […]
Alloy 400 / 2.4360
Alloy 400 is a nickel-copper solid solution strengthened alloy. The alloy is characterized by moderate strength, good weldability, good general corrosion resistance and toughness. It is useful at temperatures up to 1000°F (538°C). Alloy 400 has excellent resistance to rapidly flowing brackish or seawater where cavitation and erosion resistance is necessary. It is particularly resistant […]
Alloy 718 / 2.4668
Alloy 718 is a precipitation hardened nickel-chromium alloy with additions of niobium, molybdenum, aluminium and titanium for improved corrosion resistance combined with extremely high strength and excellent weldability, including resistance to cracking after welding.Unlike many other superalloys, it’s also quite easy to weld. This combination of great high-temperature performance up to 700°C and ease of […]
16MnCr5 / 1.7131
The steel grade 16MnCr5 is a case hardening steel with a carbon content between 0.14 and 0.19 %. It is intended for case hardening. In this process, carbon is introduced into the surface layer up to approx. 0.8% carbon content via a diffusion process (case hardening, carburisation, carbonitriding). After hardening, there is a hard, wear-resistant […]
PEEK (polyetheretherketone)
PEEK (polyetheretherketone) is a high-performance engineering plastic with outstanding resistance to harsh chemicals, and excellent mechanical strength and dimensional stability. It offers hydrolysis resistance to steam, water, and sea water. PEEK has the ability to maintain stiffness at high temperatures and is suitable for continuous use at temperatures up to 338oF (170oC). This engineering plastic has a […]
1.4542 / 17-4 PH / AISI 630 / X5CrNiCuNb16-4
1.4542 (17-4 PH) (X5CrNiCuNb16-4) steel is a progressively used maraging steel. The material 1.4542 (17-4 PH) possesses both high mechanical values similar to martensitic steels and high corrosion resistance akin to austenitic steels. 1.4542 (17-4 PH) stainless steel is commonly preferred in various industrial applications due to its high strength and corrosion resistance properties. The […]
CW008A / Cu-OF / 2.0040 / C103
C103 Copper wire or 2.0040 (which has as a minimum copper content of 99.95%) is a commercially pure grade of copper that is subject to a special manufacturing process that gives the material an oxygen-free finish. Oxygen free copper ensures high levels of electrical conductivity can be achieved whilst offering a low susceptibility to hydrogen […]
S275JR / 1.0044
S275JR grade steel is a readily weldable low carbon manganese steel with good impact resistance.This material is commonly supplied in the untreated or normalised condition.Machinability of this material is similar to that of mild steel. Typical Applications Construction Engineering Yellow goods Tanks Rail Bridges Energy S275JR steel is a structural steel grade which be used […]
