CK60 Carbon Steel is a high-carbon steel of low hardenability; it may be used in the as-rolled, annealed, normalized or liquid-quenched-and-tempered condition, depending on the desired properties. It is normally hardened by austenitizing and quenching in oil; however, it may be quenched in water if precautions are taken to prevent cracking.
Applications:
CK60 Carbon Steel are widely used in metallurgical, mechanical, electrical construction field, ships, military uses and automobile rear of products.
Shafts,bushings,connecting rods, mechanical engineering components, agricultural hand tools,large forgings , springs,cold rolled strips .
| Chemical Composition (in Weight %) | ||||||||
|---|---|---|---|---|---|---|---|---|
| Element | C | Ni | Cr | Mn | P | S | Si | Mo |
| min | 0.57 | 0.6 | ||||||
| max | 0.65 | 0.4 | 0.4 | 0.9 | 0.035 | 0.035 | 0.4 | 0.1 |
| Mechanical Properties | |||
|---|---|---|---|
| Density | 7.85 kg/dm³ | ||
| Rm min | 650 N/mm² | Rm max | 710 N/mm² |
| Rp 0.2 min | 310 N/mm² | Rp 0.2 max | 380 N/mm² |
| Elongation min | 10 % | Elongation max | 12 % |
Partial part type display:
